How do solar panels work? Solar power explained

Solar panels may seem complicated, but they're actually pretty straightforward

Updated May 16, 2024
11 min read

You probably already know that solar panels use the sun's energy to generate clean, usable electricity. But have you ever wondered how they do it?

At a high level, solar panels are made up of solar cells, which absorb sunlight. They use this sunlight to create direct current (DC) electricity through a process called "the photovoltaic effect." Because most appliances don't use DC electricity, devices called inverters then convert it to alternating current (AC) electricity, the form that your home can use. This is the electricity that ultimately saves you money on electric bills.

Don't worry—we're not here to overwhelm you with the nitty-gritty details. But if you want to go a bit deeper into the process of how solar panels create electricity, we'll explain what you should know.

Find out what solar panels cost in your area in 2024
Please enter a five-digit zip code.
  • 100% free to use, 100% online
  • Access the lowest prices from installers near you
  • Unbiased Energy Advisors ready to help

Key takeaways

  • Solar cells are typically made from a material called silicon, which generate electricity through a process known as the photovoltaic effect.

  • Solar inverters convert DC electricity into AC electricity, the electrical current appliances run on when plugged into a standard wall socket.

  • Other types of solar technology include solar hot water and concentrated solar power. They both use the sun's energy but work differently than traditional solar panels.

How solar panels work

Solar energy is the light and heat that come from the sun. To understand how it's produced, let's start with the smallest form of solar energy: the photon. Photons are waves and particles that are created in the sun's core (the hottest part of the sun) through a process called nuclear fusion. The sun's core is a whopping 27 million degrees Fahrenheit. This extreme temperature and pressure causes hydrogen atoms to collide and fuse, creating helium. The reaction releases massive amounts of energy in the form of photons. 

This process is constant: Over 500 million tons of hydrogen atoms are converted into helium every second, resulting in photons that generate solar energy here on Earth. 

In a nutshell, solar panels generate electricity when photons (those particles of sunlight we discussed before) strike solar cells. The process is called the photovolatic effect. First discovered in 1839 by Edmond Becquerel, the photovoltaic effect is characteristic of certain materials (known as semiconductors) that allows them to generate an electrical current when exposed to sunlight.

About 95% of solar cells are made from the element silicon, a nonmetal semiconductor that can absorb and convert sunlight into electricity through the photovoltaic effect. Here's how it works: 

  1. There are two layers of silicon in solar cells. Each one is specially treated, or "doped," with phosphorus and boron to create positive and negative sides of the solar cell, respectively. When photons hit the solar cells they create an electric field at the junction between the layers. 

  2. This electric field knocks electrons loose from the atoms in solar cells, setting them in motion. 

  3. The electrons flow through the solar cell and out of the junction, generating an electrical current. 

  4. Metal plates on each side of the solar cells capture the electrical current and transfer it to connecting wires. 

  5. The electrical current flows through the wires to a solar inverter (or multiple inverters), which converts it to usable electricity for your home––more on this part below.

how-solar-panels-work-electron-flow

A typical solar module includes a few essential parts:

  • Solar cells: We've talked about these a lot already, but solar cells absorb sunlight. When it comes to silicon solar cells, there are generally two different types: monocrystalline and polycrystalline. Monocrystalline cells include a single silicon crystal, while polycrystalline cells contain fragments of silicon. Monocrystalline cells provide more room for electrons compared to polycrystalline cells, resulting in higher efficiency (and more expensive) solar panels.

  • Glass casing: Provides durability and protection for solar cells. 

  • Insulation layer and back sheet: These are under the glass exterior and protect against heat dissipation and humidity inside the panel, which can result in lower solar panel performance

  • Anti-reflective coating: Increases sunlight absorption and gives the cells maximum sunlight exposure.

  • 12V wire: Regulates the amount of electricity transferred to your inverter.

  • Bus wire: Connects silicon solar cells and carries the electrical current.

Learn more about what solar panel components

Generating an electric current is the first step of a solar panel working, but the process doesn't end there. Here's how solar arrays create a usable electricity system for your home:

So far, we've been talking about photovoltaic (PV) solar because it's what many homes and businesses use to generate free, clean electricity. 

But other types of solar technology exist––the two most common are solar hot water and concentrated solar power.

Solar hot water

Solar hot water systems capture thermal energy from the sun and use it to heat water for your home. These systems consist of several major components: collectors, a storage tank, a heat exchanger, a controller system, and a backup heater.

In a solar hot water system, there's no movement of electrons, and no creation of electricity. Instead, the solar panels, known as "collectors," transform solar energy into heat. Sunlight passes through a collector's glass covering, striking a component called an absorber plate, which has a coating designed to capture solar energy and convert it to heat. The heat is transferred to a "transfer fluid" (either antifreeze or potable water) contained in small pipes in the plate.

Concentrated solar power

Concentrated solar power (CSP) works in a similar way to solar hot water in that it transforms sunlight into heat––but it doesn't stop there. CSP technology concentrates the solar thermal energy using mirrors and turns it into electricity. At a CSP installation, mirrors reflect the sun to a focal point. At this focal point is an absorber or receiver that collects and stores heat energy, which drives a heat engine (typically a steam turbine), generating electricity.

CSP is most often used in utility-scale installations to help provide power to the electric grid. It's an alternative to fossil fuel-based power plants.

Find out what solar panels cost in your area in 2024
Please enter a five-digit zip code.
  • 100% free to use, 100% online
  • Access the lowest prices from installers near you
  • Unbiased Energy Advisors ready to help
Back to the top
Did you find this page helpful?
Discover whole-home electrification
Home solar
rooftop solar icon

Create your own clean energy with solar panels.

Community solar
community solar icon

Enjoy the benefits of solar without rooftop panels.

Heating & cooling
Heat pump icon

Explore heat pumps, the latest in clean heating & cooling technology.

See solar prices near you.

Enter your zip code to find out what typical solar installations cost in your neighborhood.

Please enter a five-digit zip code.